Question

1.
2.
3.
4.
Answer (Detailed Solution Below)

Option 2 : The disc will chatter and fail to seat properly, causing noise and rapid wear / डिस्क खड़खड़ाएगी और ठीक से नहीं बैठेगी, जिससे शोर व तीव्र घिसाव होगा

Advertisement

Detailed Solution

सही उत्तर The disc will chatter and fail to seat properly, causing noise and rapid wear / डिस्क खड़खड़ाएगी और ठीक से नहीं बैठेगी, जिससे शोर व तीव्र घिसाव होगा है।

Key Points
Helpful?
PrepSnapprepsnap.in • Part -A

Question:

A globe valve body carries a cast arrow. The fitter installs it with the arrow pointing against the actual flow direction. What is the most likely consequence in service? / ग्लोब वाल्व की बॉडी पर ढली हुई तीर-निशानी है। फिटर इसे वास्तविक प्रवाह दिशा के विरुद्ध तीर करके लगा देता है। सेवा में सबसे संभावित परिणाम क्या होगा?

1.
The valve will pass full flow even when shut / बंद होने पर भी वाल्व पूर्ण प्रवाह जाने देगा
2.
The disc will chatter and fail to seat properly, causing noise and rapid wear / डिस्क खड़खड़ाएगी और ठीक से नहीं बैठेगी, जिससे शोर व तीव्र घिसाव होगा
3.
The bonnet gasket will blow out immediately / बोनट गैस्केट तुरंत फट जाएगा
4.
No effect, because globe valves are bidirectional / कोई प्रभाव नहीं, क्योंकि ग्लोब वाल्व द्विदिश होते हैं

Correct Answer: The disc will chatter and fail to seat properly, causing noise and rapid wear / डिस्क खड़खड़ाएगी और ठीक से नहीं बैठेगी, जिससे शोर व तीव्र घिसाव होगा

The arrow marks the designed flow direction (normally under and around the disc). Reversed installation makes the disc flutter and chatter against the seat, so the valve will not shut tightly, and the resulting vibration damages the seating faces and can cause water hammer. Globe valves are not bidirectional. / तीर अभिकल्पित प्रवाह दिशा दर्शाता है (सामान्यतः डिस्क के नीचे व चारों ओर)। उल्टी स्थापना में डिस्क सीट पर फड़फड़ाती व खड़खड़ाती है, अतः वाल्व कसकर बंद नहीं होता, और कंपन से सीटिंग सतह क्षतिग्रस्त होती है तथा जलाघात हो सकता है। ग्लोब वाल्व द्विदिश नहीं होते।

Downloaded from PrepSnap (prepsnap.in)