Question

1.
2.
3.
4.
Answer (Detailed Solution Below)

Option 3 : About 150–300 mm above the sump floor, but below the minimum water level / सम्प फर्श से लगभग 150–300 मिमी ऊपर, पर न्यूनतम जल स्तर के नीचे

Advertisement

Detailed Solution

सही उत्तर About 150–300 mm above the sump floor, but below the minimum water level / सम्प फर्श से लगभग 150–300 मिमी ऊपर, पर न्यूनतम जल स्तर के नीचे है।

Key Points
Helpful?
PrepSnapprepsnap.in • Part -A

Question:

A pump draws from an underground sump through a suction pipe fitted with a foot valve. To avoid drawing settled silt into the pump, the foot valve should be positioned: / पंप फुट वाल्व सहित सक्शन पाइप द्वारा भूमिगत सम्प से पानी खींचता है। जमी तलछट पंप में जाने से रोकने हेतु फुट वाल्व स्थित होना चाहिए:

1.
Resting directly on the sump floor / सीधे सम्प फर्श पर टिका हुआ
2.
Above the maximum water level / अधिकतम जल स्तर के ऊपर
3.
About 150–300 mm above the sump floor, but below the minimum water level / सम्प फर्श से लगभग 150–300 मिमी ऊपर, पर न्यूनतम जल स्तर के नीचे
4.
Inside the pump casing / पंप आवरण के अंदर

Correct Answer: About 150–300 mm above the sump floor, but below the minimum water level / सम्प फर्श से लगभग 150–300 मिमी ऊपर, पर न्यूनतम जल स्तर के नीचे

Clearance above the floor keeps the strainer out of the settled silt, while staying submerged even at the lowest level keeps the suction column charged so the prime is held. Resting on the floor clogs the strainer; above the water line the pump cannot prime. / फर्श से ऊँचाई छलनी को जमी तलछट से दूर रखती है, जबकि न्यूनतम स्तर पर भी डूबा रहना सक्शन स्तंभ को भरा रखता है ताकि प्राइम बना रहे। फर्श पर टिकने से छलनी अवरुद्ध होती है; जल रेखा के ऊपर पंप प्राइम नहीं हो सकता।

Downloaded from PrepSnap (prepsnap.in)